Server User Manual
Table Of Contents
- SPARC® Enterprise M8000/M9000 Servers Product Notes
- Contents
- Preface
- General Information about XCP 1072
- Information about Hardware
- Information about Software
- XCP Issues and Workarounds
- Solaris OS Issues and Workarounds
- Software Documentation Updates
- Identifying Degraded Memory in a System
- Identifying Different Memory Sizes in a System Board
- Identifying Permanent Memory in a Target Board
- CPU Upgrade
- Installation Notes
- Adding a New CMU Equipped with SPARC64 VII as a New Domain
- Upgrading an On-CMU SPARC64 VI to SPARC64 VII, or Adding SPARC64 VII to an Existing CMU, to an Existing Domain Configured with SPARC64 VI
- Adding a New CMU Equipped with SPARC64 VII to an Existing Domain Configured with SPARC64 VI
vii
Preface
These product notes contain late-breaking information about the SPARC
®
Enterprise
M8000/M9000 server hardware, software, or documentation that became known
after the documentation set was published.
Technical Support
If you have technical questions or issues that are not addressed in the SPARC
Enterprise M8000/M9000 servers documentation, contact a sales representative or a
certified service engineer.
Software Resources
The Solaris™ Operating System and Sun Java™ Enterprise System software are
preinstalled on your SPARC Enterprise M8000/M9000 servers.
Contact a sales representative or a certified service engineer for software resources
for your SPARC Enterprise M8000/M9000 servers.
Note – For latest patch information go to:
http://support.fujitsu-siemens.com
Installation information and README files are included in the patch download.