User guide

©
Siemens AG 2003, L:\Mobil\R65\SP65\en\FUG\von_itl\SP65_SMS.fm
SMS46
VAR Language: en; VAR issue date: 041104
left page (46) of SP65 FUG en, A31008-H7450-A1-1-7619 (03.03.2005, 11:41)
Setting
SMS signature
C ¢
M
¢Message setup
¢SMS setup¢SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
C ¢
M
¢Message setup
¢SMS setup¢SMS profiles
Up to 5 SMS profiles can be set.
These define the transmission char-
acteristics of an SMS. The pre-setting
depends on the SIM card inserted.
Activating a profile
I
Select profile.
C Activate.
Setting a profile
I
Select profile.
§Edit§ Open to edit the profile.
Service
centre
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient
Enter a standard recipient for
the profile.
Message
type
• Manual: Inquiry for all
messages.
• Standard text: Normal
SMS message.
• Fax: Transmission via SMS.
• E-mail: Transmission
via SMS.
• New: You may need to
obtain the required code
number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual, 1 hour, 3 hours,
6 hours, 1 day, 1 week,
Maximum*
* Maximum period that the
service provider permits.
Status
report
=
Receive confirmation of suc-
cessful/failed transmission of
a message. This service may
be subject to a charge.
Direct
reply =
If activated, the reply to your
SMS message is handled via
your service centre (for infor-
mation, please contact your
service provider).
SMS via
GPRS
=
Send SMS automatically via
GPRS (p. 85).
Save aft.
send
Sent SMS messages are
saved in the Sentbox list.