Dishwasher SN55HS01CA en User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in.
aus Table of contents Safety ............................................... 4 General information.......................... 4 Intended use..................................... 4 Restriction on user group................. 4 Safe installation ................................ 5 Safe use ........................................... 6 Damaged appliance ......................... 8 Risk to children ................................ 8 Safety systems ............................... 10 Preventing material damage ....
aus Terminate programme.................... 36 Switching off appliance .................. 36 Basic settings................................ 37 Overview of basic settings ............. 37 Changing basic settings................. 39 Home Connect .............................. 39 Home Connect quick start ............. 39 Home Connect settings.................. 40 Remote Start ............................ 40 Remote Diagnostics ...................... 40 Software update .............................
aus Safety Safety Please read the safety information to ensure that you use the appliance safely. General information You can find general information about this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ Follow the safety instructions and warnings. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Check the appliance after unpacking it.
Safety aus Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the instructions in the manual and installation instructions. WARNING ‒ Risk of electric shock! ¡ Improper installation is dangerous.
aus Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-approved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury.
Safety aus ¡ Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care programme. WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury.
aus Safety ▶ Never kink, crush or modify the power cord. Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Safety aus ¡ Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
aus Safety Safety systems Protect children from possible hazards resulting from the appliance. The appliance is equipped with a "Childproof lock " → Page 12.
Preventing material damage Preventing material damage Preventing material damage Preventing material damage Safe installation Follow the instructions when installing the appliance. ATTENTION! ¡ Improper installation of the appliance may cause damage. ▶ If the dishwasher is installed above or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances.
aus Childproof lock Childproof lock Childproof lock The childproof lock lets you protect children from possible hazards resulting from the appliance. The appliance is equipped with a door lock. Childproof lock Deactivating the door lock 1. Open the appliance door. 2. Push the catch of the childproof lock to the right and slide it backwards . 1 Door lock The door lock is a mechanical safety system and makes it more difficult to open the appliance door. You can activate or deactivate the door lock.
Installation and connection aus Saving energy Sensor setting SE:00 If you follow these instructions, your appliance will use less electricity and less water. Use the Eco 45° programme. The Eco 45° programme is energy-efficient and environmentally friendly. → "Programmes", Page 20 SE:01 Change the sensor setting to the default. Consumption is reduced. → "Sensors", Page 13 SE:02 AquaSensor The AquaSensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.
aus ¡ ¡ ¡ ¡ ¡ Installation and connection Installation Instructions Warranty Installation material Steam guard plate Mains cable Installing and connecting the appliance You can position your built-under or integrable appliance in a fitted kitchen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appliance, you must stop it from tipping over, e.g.
Installation and connection aus Electrical connection Connect your appliance to the power supply. Connecting the appliance to the electricity supply Notes ¡ Follow the "Safety instructions" → Page 5. ¡ Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appliance into a nearby socket. The connection data for the appliance can be found on the rating plate. 3.
aus Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. 7 6 8 5 9 4 10 3 11 2 12 1 1 1 16 Rating plate Depending on the appliance specifications Rating plate with "E number and FD number" → Page 58. The data you need for "Customer Service" → Page 57.
Familiarising yourself with your appliance 2 Detergent dispenser 3 4 Bottom basket 5 Tablet collecting tray 6 7 8 9 Top basket 10 11 12 1 Lower spray arm Cutlery drawer 1 aus "Detergent" → Page 30 is added to the detergent dispenser. "Bottom basket" → Page 24 The lower spray arm washes the tableware in the bottom basket. If the tableware has not been washed properly, clean the spray arms.
aus Familiarising yourself with your appliance 1 2 3 12 11 5 6 10 9 7 8 "Switching on the appliance" → Page 35 "Switching off the appliance" → Page 36 "Terminating the programme" → Page 36 Programmes 1 ON/OFF button 2 3 Programme buttons 4 5 6 Rinse aid refill indicator The display shows information about progress of the programme, the remaining running time or the basic settings. You can change the basic settings via the display and the setting buttons.
Familiarising yourself with your appliance 12 1 Programme sequence display aus The programme sequence display shows the current cycle of the appliance, e.g. washing, rinsing or drying.
aus Programmes Programmes Programmes You can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected.
Programmes Programme aus Consumption values 1) Duration in hrs:mins 2) Energy consumption in kWh 3) Water consumption in litres ¡ 1) 1:50 - 2:15 ¡ 2) 1,200 - 1,400 ¡ 3) 11,5 - 14,0 Use Programme sequence Sensor-controlled: ¡ Optimised by sensors depending on the soiling level of the washing water Eco 45° ¡ 1) 3:15 ¡ 2) 0,650 ¡ 3) 11,0 Tableware: ¡ Pots and pans, nonfragile tableware and cutlery Level of soiling: ¡ Stubborn burned or dried-on food remnants containing starch and protein Tableware: ¡
aus Programmes Programme Speed 45° Machine Care Favourite Consumption values 1) Duration in hrs:mins 2) Energy consumption in kWh 3) Water consumption in litres ¡ 1) 0:29 ¡ 2) 0,800 ¡ 3) 10,5 ¡ ¡ ¡ ¡ ¡ ¡ 1) 2:10 2) 1,350 3) 15,2 1) 0:15 - 0:15 2) 0,050 - 0,050 3) 4,0 - 4,0 Use Programme sequence Tableware: ¡ Delicate tableware, cutlery, temperature-sensitive plastics and glasses Level of soiling: ¡ Lightly adhering fresh food remnants Use only if appliance is unloaded.
Additional functions Tip: You can use the Home Connect app to download additional programmes and save them to the button.1 Additional func- Use tion gramme and at any time when the programme is running. ¡ Energy and water consumption are increased. ¡ To ensure a higher hygiene status for the apHygienePlus pliance and tableware, the temperature is raised and maintained for an extra-long period. ¡ Especially suitable for cleaning chopping boards or baby bottles.
aus Features Top basket Arrange cups and glasses in the top basket. You can adjust the height of the top basket to make room for larger items of tableware. Adjusting top basket with side levers To wash large items of tableware in the baskets, adjust the shelf position of the top basket. 1. Pull out the top basket. 2. To prevent the basket from suddenly dropping down, hold the side of the basket by the top edge. 3. Press in the levers on the right and left on the outside of the basket. 4.
Features aus Cutlery drawer Arrange cutlery in the cutlery drawer. Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown. Arrange cutlery with the points and sharp edges downwards. Etagere Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards.
aus Features Folding prongs Baking sheet spray head Use the folding prongs to position tableware securely, e.g. plates. Use the baking sheet spray head to clean large items of tableware, e.g. trays, grilles and plates. You can fold the prongs down to position pans, bowls and glasses better.1 Folding down prongs1 If you do not need the prongs, fold them down. 1. Push the lever forwards and fold down the prongs . 1 2 Arrange max.
Features 2. Insert the baking sheet spray head in the holder right . and turn to the aus Selecting glassZone Note: Consumption will increase if you operate your appliance with the glassZone switched on. 1. Pull out the top basket. 2. Set the slider to ON or OFF. a The baking sheet spray head clicks into position. Removing baking sheet spray head If you no longer require the baking sheet spray head, remove it from the appliance. 1.
aus Features 5. Place the glassZone in the top basket and lock in position 6. Push in the top basket. . Check that the mounts are in the correct position. a The glassZone audibly clicks into position . Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery basket Setting 1 max. ø 2 max. ø 3 max. ø Top basket 22 cm 24.5 cm 27 cm Bottom basket 31 cm 27.5 cm 25 cm Appliance height 81.5 cm with cutlery drawer Setting 1 max. ø 2 max. ø 3 max.
Before using for the first time Before using for the first time Rinse aid system Before using for the first time Rinse aid system Configure the settings for initial startup. You can use the rinse aid system and rinse aid to get tableware and glasses rinsed perfectly without marks. Making settings for initial start-up Rinse aid Before using for the first time On initial start-up or after a reset to the factory settings, you will need to make settings. Tip: Connect your appliance to a mobile device.
aus Detergent Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. Setting the amount of rinse aid If there are streaks or water marks on tableware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r:05. 4.
Detergent Detergent Powder detergent Liquid detergent Description leave residues of detergent. This may impair the cleaning effect. Powder detergent is recommended for shorter "Programmes" → Page 20. The dosage can be adjusted to the level of soiling. Liquid detergent works faster and is recommended for shorter "Programmes" → Page 20 without PreRinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed.
aus ¡ ¡ ¡ ¡ ¡ ¡ Detergent levels of active agents or completely dispense with certain substances. The cleaning effect may be restricted here. Set the rinse aid system to the separate or combined detergent in use. Follow the manufacturer's instructions for each detergent. To prevent sticking, only touch detergents in a water-soluble pouch with dry hands and only ever place them in a dry detergent dispenser.
Tableware 3. Close the lid of the detergent dis- penser. aus Damage to glass and tableware Avoid damage to glass and tableware. a The lid clicks into position. a The detergent dispenser will open automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage.
aus Tableware Cause The water temperature of the programme is too high. Recommendation Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay. Arrange tableware Arrange the tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware. Tips ¡ Using the appliance allows you to save energy and water compared to washing-up by hand.
Basic operation Removing tableware WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. ▶ When the programme has ended, do not empty the appliance until the tableware has cooled down for a while. 1. To prevent water dripping on the tableware, unload it starting at the bottom and working up. 2. Check the washing tank and accessories for soiling and clean if necessary.
aus Basic operation 3. Press . a This activates time preselection. Tip: To deactivate timer programming, press or repeatedly until "00h:00m" appears in the display. Starting the programme ▶ Press . a The programme has ended when the display shows "00h:00m". Notes ¡ If you want to add more tableware while the appliance is running, do not use the tablet collecting tray as a handle for the top basket. You might touch the partially dissolved tablet.
Basic settings aus Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Rinse aid dispensing Display text r:05 1 Selection r:00 - r:06 Sensor setting SE:00 1 SE:00 - SE:02 Extra Dry d:00 1 d:00 - d:01 Hot water A:00 1 A:00 - A:01 1 Description Set the amount of rinse aid to be dispensed.
aus Basic settings Basic setting Start programme Display text SP:00 1 Selection SP:00 - SP:01 Tone volume SL:02 1 SL:00 -SL:03 Button volume bL:02 1 bL:00 - bL:03 Wi-Fi Cn:00 Cn:00 - Cn:01 Remote Start rc:01 rc:00 - rc:02 1 38 Factory setting (may vary according to model) Description Set a default programme for when the appliance is switched on.
Home Connect Basic setting Factory setting 1 Display text rE: Selection Start with Y:ES Confirm with 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly until the display shows the required setting. 4. Press or repeatedly until the display shows the right value. You can change several settings. 5. To save the settings, press for 3 seconds. Home Connect Home Connect This appliance is network-capable.
aus Home Connect Connecting the appliance to WLAN home network (Wi-Fi) Requirements ¡ Home Connect app is installed on your mobile device. ¡ Wi-Fi on the router is activated. ¡ The appliance receives signals from the WLAN home network (WiFi) at its installation location. 1. With the help of the Home Connect App scan the QR code. Activating Remote Start When you have selected "rc:01" in the basic settings of this function, activate the function on your appliance.
Cleaning and servicing Data protection Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
aus Cleaning and servicing Machine Care Deposits, e.g. from remnants of food and limescale, can cause your appliance to malfunction. To avoid such faults and reduce odours, we recommend cleaning your appliance at regular intervals. Machine Care combined with machine care products and machine cleaners is the right programme for the care of your appliance. Phase 1 Removal of Grease and limescale 2 Food remnants and deposits Detergent Liquid machine care product or machine descaler in powder form.
Cleaning and servicing aus Only use machine care products specially designed for dishwashers. 4. Pour the machine cleaner into the detergent dispenser until it is filled completely. Do not place any additional machine cleaner in the appliance interior. 5. Press . 6. Press . a Machine Care is run. a Once the programme has ended, the indicator for Machine Care goes out. 2. Turn the coarse filter anticlockwise Filter system 3. Pull down the micro filter to re- ‒ and remove the filter system .
aus Cleaning and servicing Carefully clean the rim of dirt between the coarse and the fine filter. 6. Re-assemble the filter system. Make sure that the locking catches on the coarse filter click into position. 7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up. Cleaning spray arms Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. 1.
Troubleshooting aus Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Troubleshooting WARNING Risk of electric shock! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance.
aus Troubleshooting Fault E:32-00 will light up alternately or indicator for water supply lights up. Cause Water tap is jammed or furred up. Troubleshooting ▶ Turn on the water tap. The flow rate must be at least 10 l/ min when the water supply is open. The filters in the water con- 1. Switch off the appliance. nection of the supply or 2. Pull out the mains plug. AquaStop hose are blocked. 3. Turn off the water tap. 4. Unscrew the water connection. 5. Remove the filter from the supply hose 6.
Troubleshooting aus Fault E:61-02 will light up alternately. Cause Cover of the wastewater pump is loose Troubleshooting ▶ Secure the cover of the "Wastewater pump " → Page 56 so it clicks into position. E:90-01 will light up alternately. Mains voltage is too low. This is not a fault on the appliance. 1. Contact an electrician. 2. Have the mains voltage and electrical installation checked by an electrician. A different error code apA technical fault is present. pears in the display window.
aus Troubleshooting Fault Tableware is not dry. Cause Troubleshooting Water collects in recesses of ▶ Position tableware at an angle the tableware or cutlery. where possible. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying per- formance. 2. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- ▶ Activate Extra Dry. prove drying performance. Tableware removed too 1. Wait until the programme ends.
Troubleshooting Fault Remnants of food on tableware. aus Cause Tableware is placed too close together or basket is overfilled. Troubleshooting 1. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the tableware. 2. Avoid points of contact. Spray arm rotation is blocked. ▶ Arrange tableware so that it does Spray arm nozzles are blocked. Filters are soiled. ▶ Clean the "Spray arms" → Page 44. Filters are inserted incorrectly and/or not engaged. 1.
aus Troubleshooting Fault Detergent residue in the appliance Water marks on plastic parts. Cause Tabs are used in the quick or short programme. Dissolving time of the tab is not attained. Washing effect and dissolving performance are reduced after a prolonged storage time or detergent is very lumpy. Due to laws of physics droplet formation on plastic surfaces is unavoidable. After drying water marks are visible. Troubleshooting ▶ Select a more intensive Programme or use Powder detergent.
Troubleshooting Fault Coloured coatings (blue, yellow, brown) that are difficult or impossible to remove are present inside the appliance or on stainless steel tableware. aus Cause Troubleshooting The formation of films is due ▶ Clean the appliance. to substances contained in You can remove deposits with vegetables (cabbage, celery, "Mechanical cleaning" → Page 41 potatoes, noodles, etc.) or or a machine cleaning product. It tap water (manganese).
aus Troubleshooting Fault Removable streaks are present on glasses, glassware with a metallic appearance and cutlery. Irreversible clouding of glassware. Cause Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Glasses are not dishwasherproof, only suitable for dishwashers. Troubleshooting ▶ Only remove large remnants of food and do not prerinse tableware. ▶ Adjust the sensitivity of the sensors.
Troubleshooting aus Home Connect problem Fault Connection to home network is not established. Cause WLAN on router is not active. Troubleshooting ▶ Check the wireless network connection of your router. WLAN display is flashing. Connection to home network is not available. ▶ Activate the wireless network con- Home Connect set incorrectly. ▶ Please consult the documents sup- Technical fault is present. ▶ Please consult the information Home Connect cannot be implemented correctly.
aus Troubleshooting Fault Appliance does not start. Cause The mains fuse has tripped. Troubleshooting ▶ Check the relevant fuse. Mains cable is not inserted. 1. Check whether the socket works. 2. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Programme starts automatically. Appliance stops during the programme or cuts out. Appliance door is not closed ▶ Close the appliance door. properly.
Troubleshooting aus Noise Fault Cause Troubleshooting Filling valves making knock- Caused by the domestic in- ▶ Can only be remedied in the doing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- ▶ Arrange tableware so that the spray ware. arms do not strike tableware. With a small load the water jets directly strike against the tub. ▶ Distribute the tableware evenly.
aus Transportation, storage and disposal Clean wastewater pump 8. Insert the pump cover down Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. ▶ Remove any foreign bodies carefully. 1. Disconnect the appliance from the power supply. 2.
Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely. ▶ "Empty the appliance." → Page 57 Valuable raw materials can be reused by recycling. Transporting the appliance To avoid damage to the appliance, empty it before transporting. Note: Always transport the dishwasher upright to prevent residual water getting into the machine's controls and damaging the appliance.
aus Technical specifications With any warranty claims, we will make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.
Technical specifications aus Information regarding Free and Open Source Software This product includes software components that are licensed by the copyright holders as free software or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect App: "Profile -> Legal information -> Licence Information".
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.
