Network Hardware User Manual

86 U3585-J-Z125-8-76
MODIFY-COSMOS-PARAMETER Statements for SM2 administrators
BUFFER-SIZE = *UNCHANGED
The currently specified number of pages per buffer is not changed.
BUFFER-SIZE = <integer 1..7>
Buffers of the specified size (number of pages) are created.
NUMBER-OF-BUFFERS =
Specifies the number of buffers.
NUMBER-OF-BUFFERS = *UNCHANGED
The currently specified number of buffers is not changed.
NUMBER-OF-BUFFERS = <integer 2..128>
COSMOS creates the specified number of buffers for writing events.
ADDITIONAL-INFO =
Specifies additional data to be recorded.
ADDITIONAL-INFO = *UNCHANGED
The existing data specified for ADDITIONAL-INFO is not changed.
ADDITIONAL-INFO = *NONE
No additional data is recorded.
ADDITIONAL-INFO = *CONFIGURATION
The configuration at the start of monitoring is also recorded.
ADDITIONAL-INFO = *VM2000(...)
The VM2000 events are also recorded. For this purpose, they must be explicitly opened
(ADD-COSMOS-EVENT statement).
FILE-NAME = <filename 1..54 without-gen-vers>
Specifies the name of the file to which the VM2000 events are written.
OUTPUT =
Specifies how the COSMOS output files are written.
OUTPUT = *UNCHANGED
The currently specified value for OUTPUT is not changed.
OUTPUT = *DISK(...)
The COSMOS monitoring data is written sequentially to the files on hard disk; i.e. there is
a write task for each output file. If a monitoring data buffer is full, a write task is activated
that writes the buffer to the corresponding file.
FILE-NAME = list-poss(16): <filename 1..54 without-gen-vers>
Specifies the file(s) to which the COSMOS monitored data is written.