Network Hardware User Manual

436 U3585-J-Z125-8-76
SM2 statements (overview) Appendix
SHOW-SM2-STATUS - Output status of SM2 system tasks
INFORMATION = *STD / *TASK / *EVENT-TRACE(...)
*EVENT-TRACE(...)
 FROM = *ACTUAL / <integer 1..32767>
SHOW-USER-MEASURED-OBJECTS - Output monitored objects and associated users
TYPE = *ALL / list-poss(3): *FILE / *ISAM / *TASK
START-MEASUREMENT-PROGRAM - Start monitoring program run
TYPE = list-poss(31): *BCAM-CONNECTION / *CHANNEL-IO / *CMS / *COSMOS / *DAB / *DISK /
*DISK-FILE / *DLM / *FILE / *GS / *GSVOL / *HSMS / *ISAM / *MSCF / *NET-DEVICE /
*NSM / *PCA /*PERIODIC-TASK / *PFA / *POSIX / *RESPONSETIME / *SERVICETIME /
*SVC / *SYSSTAT / *TASK / *TCP-IP /*TLM / *UTM / *VM
STOP-MEASUREMENT-PROGRAM - Terminate monitoring program run
TYPE = *ALL / list-poss(31): *BCAM-CONNECTION / *CHANNEL-IO / *CMS / *COSMOS / *DAB / *DISK /
*DISK-FILE / *DLM / *FILE / *GS / *GSVOL / *HSMS / *ISAM / *MSCF / *NET-DEVICE /
*NSM / *PCA / *PERIODIC-TASK / *PFA / *POSIX / *RESPONSETIME / *SERVICETIME /
*SVC / *SYSSTAT / *TASK / *TCP-IP / *TLM / *UTM / *VM