Network Hardware User Manual

430 U3585-J-Z125-8-76
SM2 statements (overview) Appendix
OPEN-LOG-FILE - Open SM2 output file
FILE = *STD / *BY-LINK-NAME
,BUFFER-OUTPUT = *NORMAL / *IMMEDIATE
REMOVE-BCAM-CONNECTION-SET -
Exclude connection set from BCAM-CONNECTION monitoring
SET-NAME = *ALL / <alphanum-name 1..16>
REMOVE-CONNECTION-SET -
Exclude connection set from RESPONSETIME monitoring
SET-NAME = *ALL / <alphanum-name 1..16>
REMOVE-COSMOS-EVENT -
Remove events from COSMOS monitoring parameters
EVENT-NAME = *STANDARD-EVENTS / *ALL / list-poss(67): *STANDARD-EVENTS / *ACF / *BCAM /
*BCPT / *BLS / *BOUR / *CHTM / *CMD / *CMS / *DAB / *DCAM / *DLM / *EIA / *EIA2 /
*EIA3 / *FITC / *GSAC / *HAL / *IDLE / *INTR / *IONQ / *ISEV / *ISPL / *KAI / *LOCK / *MSG / *NSM /
*PAGE / *PAM / *PCCC / *PCTC / *PDEA / *PEND / *PIO / *PMIO / *PRGS / *PRGT /
*PRTY / *RELM / *REQM / *SDV / *SLOT / *SNAP / *STD1 / *STDI / *STDN / *SVC /
*TGMA / *TGMP / *TGMT / *TIC / *TINF / *TLM / *TLT / *TSKI / *TSVC / *UTM / *VMCH / *VMH /
*VMI / *VMLK / *VMPD / *VMPR / *VMS / *VM2 / *WSCT / *XEIA
REMOVE-FILE - Remove file(s) from FILE monitoring parameters
FILE-NAME =
*ALL / <filename 1..54>