Network Hardware User Manual

U3585-J-Z125-8-76 389
Messages NPS0577
NPS0577 TOO MUCH USERS MONITOR THE SAME ISAM POOL
Meaning
Maximal 64 users can monitor the same ISAM POOL at the same time.
Statement rejected.
NPS0578 INVALID CACHE-ID. PERMISSIBLE VALUE RANGE: 0 TO 62
Meaning
The statement has been rejected.
NPS0579 INVALID OBJECT SPECIFICATION IN ’//SET-PERIODIC-TASK-PARAMETER’ STATEMENT
Meaning
The statement has been rejected.
NPS0580 INVALID FILENAME
Meaning
Possible reasons: The filename is invalid, because
- the specified USER ID doesn’t exist,
- the filename is too long,
- the complete filename with CAT ID and USER ID is too long,
- the filename with relative FGG is not cataloged.
NPS0581 USER ID(S) ’(&00)’ DO NOT EXIST.
Meaning
An attempt was made to enable a user monitoring run for not existing USER ID(S). The
statement has been rejected.
NPS0590 MONITORING PROGRAM ’(&00)’ INVALID DEFINED. STATEMENT REJECTED
Meaning
It was attempted to start a monitoring program with invalid channels.
Invalid channels are:
- Channels, which are not any more in the configuration
Response
Check and correct monitoring program definition.
NPS0591 WARNING: MONITORING PROGRAM ’(&00)’ PARTLY INVALIDLY DEFINED. INVALID CHANNELS
IGNORED
Meaning
While starting a monitoring program, it was found that some invalid channels were selected.
The monitoring program is only started with the valid channels; the invalid channels are not
monitored.
Invalid channels are:
- Channels, which are not any more in the configuration