Network Hardware User Manual

384 U3585-J-Z125-8-76
NPS0545 Messages
NPS0545 VERSIONS OF SM2 TU PART (&00) AND SM2 MODULE LIBRARY (&01) ARE INCOMPATIBLE.
SM2 TERMINATED ABNORMALLY
(B) Routing code: R Weight: 99
Meaning
The version number (&00) of the TU part of SM2 and the version number (&01) of modules
in the SM2 module library do not match.
NPS0546 WRONG BCAM-VERSION. STATEMENT REJECTED.
Meaning
The measurement program BCAM-CONNECTION cannot fetch any data by this
BCAM-Version.
NPS0547 MONITORING PROGRAM ’(&00)’ WAS NOT ACTIVE
(B) Routing code: R Weight: 50
Meaning
The SM2 administrator has tried to deactivate or modify a monitoring program that has not
been activated.
The statement has been rejected.
NPS0548 WARNING: MONITORING PROGRAM ’(&00)’ STARTED, BUT ACCORDING SUBSYSTEM NOT LOADED
IN SYSTEM
Meaning
SM2 gets not the measurement data from the specified subsystem. As far as this is not
available, SM2 cannot deliver any measurement data.
Response
Contact the system administrator, so that he can start the required subsystem, or stop the
monitoring program to save resources.
NPS0549 START OF SERVICE TIME STATISTICS NOT POSSIBLE. TRY START STATEMENT AGAIN LATER
(B) Routing code: R Weight: 99
Meaning
It is not possible to start collection of service time statistics at the moment as the previous
service time statistics run has not yet been completed.
Response
The statement //START-MEASUREMENT-PROGRAM TYPE=SERVICETIME may be
repeated later.
NPS0550 WARNING: TASK STATISTICS STARTED WITHOUT RESPONSE TIME VALUES
(B) Routing code: R Weight: 50
Meaning
No response time values can be recorded for task statistics as subsystem BCAM-SM2
could not be loaded or initiated.