Network Hardware User Manual

U3585-J-Z125-8-76 383
Messages NPS0540
NPS0540 VERSIONS OF SM2 AND VM2000 ARE INCOMPATIBLE. STATEMENT REJECTED
Meaning
The measurement program VM cannot fetch any VM data.
NPS0541 INVALID TASK DEFINITION SPECIFIED FOR TSN ’(&00)’
(B) Routing code: R Weight: 99
Meaning
When defining a monitoring program, an attempt was made to specify a task that is not valid
for this program.
The statement has been rejected.
NPS0542 WRONG BUCKET VALUES. STATEMENT REJECTED.
Meaning
Only 1-4 buckets values may be specified in a list.
The values must be in ascending order.
Permissible value range: 1 to 999999.
The statement has been rejected.
NPS0543 SM2 MONITORING TASK NOT WORKING CORRECTLY
(B) Routing code: R Weight: 99
Meaning
Possible reasons:
- The SM2 monitoring task failed to answer a user request within a given time.
- The SM2 monitoring task has already been terminated due to an unrecoverable internal
error.
Response
A non-privileged user can check the SM2 status using the SM2 STATUS statement, and
should then contact the SM2 administrator if this is necessary.
The SM2 administrator can check the status of the SM2 using the //SHOW-SM2-STATUS
statement, and can then terminate and restart the subsystem if this is necessary.
NPS0544 SM2 VERSION (&00) AND BS2000 VERSION (&01) ARE INCOMPATIBLE. SM2 CANNOT BE
LOADED
(B) Routing code: R Weight: 99
Meaning
The version number (&00) of modules in the SM2 module library and the version number
(&01) of the operating system do not match.