Network Hardware User Manual

378 U3585-J-Z125-8-76
NPS0502 Messages
NPS0502 SYSTEM ERROR ON CALLING SM2
(B) Routing code: R Weight: 99
Meaning
A serious error has occured when calling SM2
Possible reasons:
- an unexpected return code was delivered when calling an internal BS2000 system
function.
- SM2 itself detected an inconsistency in its own logic.
The statement has been rejected.
Response
Contact the SM2 administrator. He can determine the detailed error cause using the trace
entries of the //SHOW-SM2-STATUS function.
In that case he is able to clear away the difficulties or he can produce detailed diagnostic
material.
NPS0504 SYSTEM ERROR DURING SM2 RUN: CODE=(&00), SUBCODE=(&01)
(B) Routing code: R Weight: 99
Meaning
This message is only put out during test phase of SM2.
NPS0507 SYNTAX ERROR. CYCLE NOT IN PERMITTED RANGE
(B) Routing code: R Weight: 99
Meaning
Possible reasons:
- The specified monitoring cycle is not in the permitted range from 10 to 3600 seconds.
- The specified sampling cycle is not in the permitted range from 200 to 10000
milliseconds.
The statement has been rejected.
NPS0514 SM2 LOGGING FILE SPECIFIED VIA LINK NAME AND NO CORRESPONDING /SET-FILE-LINK
COMMAND ENTERED
(B) Routing code: R Weight: 99
Meaning
The SM2 administrator has failed to define a /SET-FILE-LINK command for the file
attributes of the SM2 logging file.
Response
Enter a /SET-FILE-LINK command with LINK-NAME=SMLINK and try again.