Network Hardware User Manual

U3585-J-Z125-8-76 367
Messages NPC0061
NPC0061 ERROR IN COSMOS-WRITETASK
Meaning
The buffer task for the file with linkname ’(&00)’ returns an error.
You can determine the detailed error cause using the trace entries of the //SHOW-SM2-
STATUS function.
NPC0062 MONITORING PROGRAM COSMOS ALREADY INITIALIZE. STATEMENT REJECTED
Meaning
An attempt was made to initialize the monitoring program COSMOS that has already been
initialize or start.
NPC0063 ERROR DURING START OF UTM MEASUREMENT. MEASUREMENT PROGRAM COSMOS NOT STARTED.
Meaning
Event UTM cannot be opened, because the subsystem UTM is not created.
Statement //INIT-COSMOS or //START-MEASURMENT-PROGRAM COSMOS rejected.
Response
Create subsystem UTM first and then start the COSMOS measurement.
NPC0064 ERROR DURING PROCESSING OF COSMOS MEASUREMENT FILE: ’(&00)’
Meaning
You can determine the detailed error cause using the trace entries of the //SHOW-SM2-
STATUS function.
NPC0065 INVALID FCBTYPE OF COSMOS MEASUREMENTFILE
Meaning
The indicated file exists already and does not have the FCBTYP PAM.
Response
Create a new file or access a file with correct FCBTYP PAM.
NPC0066 DMS-ERROR IN COSMOS-MEASUREMENTFILE ’(&01)’. DMS-CODE ’(&00)’. /HELP-MSG
DMS(&00).
Meaning
For more detailed information about the DMS error code enter /HELP-MSG or see the
BS2000 manual ’System messages’.
NPC0067 ERROR DURING MACROPROCESSING ’DCAMPNSM’.