Network Hardware User Manual

U3585-J-Z125-8-76 297
SM2 reports RESPONSETIME report
Category-specific screen
Monitoring information
For each screen the associated connections or connection groups are output over the
monitoring values; the connection set name (in the example it is *GLOBAL) is output, too.
(A connection set with the name *GLOBAL, in which all connections are monitored
(CONNECTION (*ALL,*ALL,*ALL)), is automatically defined using the SET-
RESPONSETIME-PARAMETER statement.)
CONN-TYPE: Types of connections taken into account during monitoring:
CATGORY NAME Name of the category
RESPONSETIME Monitoring data for the response time
THINK TIME Monitoring data for the think time
TRANSACTION TIME Monitoring data for the transaction time
WAIT TIME Monitoring data for the wait times (in the BCAM pool)
AVG Average duration of the transaction (in seconds) (without overflow
values)
REMOTE: Remote connections only
LOCAL: Local connections only
BOTH: Local and remote connections
D016ZE04 SM2 RESPONSETIME (CATEGORY) CYCLE: 120 S 99-03-24 14:30:00
*GLOBAL APPLICATION: *ALL
PARTNER: *ALL
CONN-TYPE:REMOTE PROCESSOR: *ALL
CATGORY| RESPONSE TIME | THINK TIME |TRANSACTION TIME | WAIT TIME
NAME | AVG #INT RATE| AVG #INT RATE| AVG #INT RATE| AVG #INT RATE
-------+-----------------+-----------------+-----------------+-----------------
SUM | 0.1 4583 38.2| 0.6 4581 38.2| 0.1 4563 38.0| 0.0 71 0.6
SYS | 0.1 4255 35.5| 0.1 4252 35.4| 0.1 4288 35.7| 0.0 56 0.5
DIALOG | 0.0 1 0.0| 78.5 1 0.0| 1.6 1 0.0| 0.0 0 0.0
TP | 1.7 42 0.4| 7.0 50 0.4| 1.8 41 0.3| 0.0 5 0.0
TP1 | 0.5 17 0.1| 2.5 18 0.2| 0.5 16 0.1| 0.0 10 0.1
DIALOG1| 0.4 259 2.2| 7.2 252 2.1| 0.4 217 1.8| 0.0 0 0.0
DIALOG2| 1.1 4 0.0| 5.3 3 0.0| 0.0 0 0.0| 0.0 0 0.0
DIALOG3| 6.1 5 0.0| 2.9 5 0.0| 0.0 0 0.0| 0.0 0 0.0