Network Hardware User Manual

294 U3585-J-Z125-8-76
RESPONSETIME report SM2 reports
Example
Category-specific screen for the selected connection set ($DIALOG,*ALL,*ALL)
Categories for which no values have been specified are not output. If values are specified
for more than 13 categories, the screen is scrolled upwards by the corresponding number
of lines so that the topmost lines of the report are not visible on the screen.
D016ZE04 SM2 RESPONSETIME (CATEGORY) CYCLE: 120 S 99-03-24 14:30:00
DIALOG APPLICATION: $DIALOG
PARTNER: *ALL
CONN-TYPE:REMOTE PROCESSOR: *ALL
CATGORY| RESPONSE TIME | THINK TIME |TRANSACTION TIME | WAIT TIME
NAME | AVG #INT RATE| AVG #INT RATE| AVG #INT RATE| AVG #INT RATE
-------+-----------------+-----------------+-----------------+-----------------
SUM | 0.2 262 2.2| 9.0 249 2.1| 0.4 255 2.1| 0.0 0 0.0
SYS | 0.0 21 0.2| 13.1 21 0.2| 0.3 22 0.2| 0.0 0 0.0
DIALOG | 0.0 1 0.0| 78.5 1 0.0| 1.6 1 0.0| 0.0 0 0.0
TP1 | 0.0 15 0.1| 2.0 14 0.1| 0.3 15 0.1| 0.0 0 0.0
DIALOG1| 0.2 219 1.8| 8.7 208 1.7| 0.4 217 1.8| 0.0 0 0.0
DIALOG2| 1.5 3 0.0| 7.9 2 0.0| 0.0 0 0.0| 0.0 0 0.0
DIALOG3| 6.2 3 0.0| 4.9 3 0.0| 0.0 0 0.0| 0.0 0 0.0