Network Hardware User Manual

202 U3585-J-Z125-8-76
SM2 reports SM2 screen output
SM2 reports
The monitored data is broken down into factually related groups and entered in various
reports. The following reports may be output without the SM2 administrator having to
activate an optional monitoring program.
ACF report Overview of activation control of system task
management
ACTIVITY report Overview of the overall system load
CATEGORY QUEUE report Overview of the queue occupancy of all categories
CATEGORY WSET report Overview of the working sets of all categories
CHANNEL report Overview of the current channel occupancy.
The CHANNEL report is a special case:
The values BUSY and NON OVERLAP are output by
default. For other monitored data, you must use the
CHANNEL-IO monitoring program.
CPU report Overview of CPU utilization for the various CPUs
DEVICE report Overview of peripheral activities
GLOBAL report Overview of host-specific monitored data on important
system activities
MEMORY report Overview of main memory load and virtual address space
PCS report Overview of PCS (Performance Control Subsystem)
activity (used only if PCS is installed)
SHARED PVS report Overview of the I/Os and the queue lengths of the shared
pubsets