Network Hardware User Manual

U3585-J-Z125-8-76 151
SM2 operation Statements for nonprivileged users
Statements for controlling reports
The following statements are used to control reports.
In automatic output mode, the selected reports are output regularly over a defined period
of time. The overflow screens are not output in this mode.
The period of time over which reports are output is known as the output cycle. When the
program is started, this is preset to the current length of the monitoring cycle, but can be
changed by the user. The interval between reports depends on the number of reports
output in the last output cycle. In the first output cycle, reports are output without a delay.
The user must ensure that a practical relationship is maintained between the monitoring
cycle and the output cycle. Further information can be found under “Relationship between
the monitoring cycle and the output cycle” on page 153.
CHANGE-ISAM-STATISTICS Include and exclude ISAM pools
STOP-ISAM-STATISTICS Terminate the monitoring of ISAM pools
Statement Function
OUTPUT Define the output mode. Reports are output either
automatically at regular intervals (automatic output
mode) or at the request of the user (controlled mode).
REPORT Select reports
RESTART Start the output of selected reports. Unlike the START
statement, this statement does not allow for the retrieval
of new monitored data.
START Start report output
Statement Function