Installation Instructions
Document Number: 129-369
Installation Instructions
September 26, 2018
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Flowrite is a registered trademark of Siemens Industry, Inc. Other product or company names mentioned
herein may be the trademarks of their respective owners. © 2018 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them to
sbt_technical.editor.us.sbt@siemens.com
Document No. 129-369.
Printed in the U.S.A.
Page 6 of 6
Dimensions, Continued
CAUTION:
Use care when removing the knockout. Do
not damage the circuit board.
NOTE: Use the top knockout position when installing the
Weather Shield.
SERVICE ENVELOPE
MINIMUM ACCESS
SPACE RECOMMENDED
4 inches (100 mm)
8 inches (200 mm)
Figure 14. SKD62UA Dimensions in Inches (Millimeters).