User Manual

EPD - Type II
According to ISO 14021
Steel Parts 547 … 565g
Steel <=5% alloyed Spring, Parts 3.687 … 3.731g
Steel >5% alloyed Screws, Springs 185 … 187g
Sn / Sn alloy Parts 1g
Zn / Zn alloy Parts 11g
Mineral oil Hydraulic Fluid 1.012 … 1.014g
Housing: PA6, Spring: steel, Insert: brass, Screw: ste
e
Terminal
Microswitch
Wire: copper, Insulation :ETFE Cable / Wire 9 … 10g
FR4; halogenated FR4 105x60 mm 47 … 48g
*Variant parts list
[g]
Total weight of device
Cabling entrance, Coil body
Cover
Parts
Housing, Console, Cylinder
Parts
Spring, Parts
Screws Springs
Others
PCBAs (Printed Circuit Board
assembled)
25
3.193
565
3.730
187
SKB62UA
9.473
12
88
3.730
187
3.193
565
3.687
184
11
8
546
2.893
SKB62/F
8.993
20
187
25
2.883
8
SKB60
9.204
11
8
558
3.730
SKB62
9.206
12
187
11
SKB62U
9.472
25
558
3.730
25
2.883
Screws
,
Springs
Cable / Wire
FR4 105x60 mm
Typical energy consumption
[kWh/a]
Packaging
Folded Box [g]
Printed Paper
Comments
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may be
mandated by law or ecologically sensible.
Observe all local and applicable laws.
Disposal
Regulation (EC) No. 1907/2006 (REACH)
EU-directive 2011/65/EU (RoHS)
The device is free from substances which interfere with lacquer wetting.
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
9
48
738
44
187
10
738
39
10
187
9
46
184
9
46
753
29
10
187
738
29
10
46 46
98
738
29
9
187
Page 2/3