Treadmill User Manual

7ML19985GE01 SITRANS LC 500 – INSTRUCTION MANUAL Page 37
mmmmm
User Interface
How to access the data:
Access data in the transmitter from 28 menu items divided between two menu levels: 00 to
0F and 10 to 1F. Use the rotary switch and push-buttons in combination to select an item
and adjust the value.
The functions of each menu item are illustrated in application examples on page 93 to 94.
Details on using each menu item are given in
Appendix A: Menu Groups on page 54. (See
also
Rotary Switch Positions – Quick Reference on page 41 showing the switch position
and button press combinations used to carry out different functions.)
Menu Levels 00 to 0F and 10 to 1F
Menu 00 to 0F Description Menu Group Details
09 Stepsize Update Value
Transmitter
Variable Settings
page 55
0A Damping page 56
0B Lower Sensor Limit page 56
0C Upper Sensor Limit page 57
0D Delta Range Setting page 57
0E Lower Range Value page 58
0F Upper Range Value page 59
00 Dynamic Value (PV)
Transmitter
Variable Value
page 59
02 Max./Min. Recorded Value page 60
01 Transmitter Variable select for PV page 60
03 Upper Threshold Delay: 2-state mode
Analog Output
Signalling
(loop-current)
page 62
04 Lower Threshold Delay: 2-state mode page 62
05 Upper Threshold Setting: 2-state mode page 63
06 Lower Threshold Setting: 2-state mode page 64
07 Analog Signalling Mode page 64
08 Analog Fault Signalling page 66
Menu 10 to 1F Description Menu Group Details
10 Dynamic Value (PV)
Transmitter
Variable Values
page 59
1C Transmitter Variables Dynamic Value page 61
13 Upper Threshold Delay: solid-state output
Digital Output
Signalling
page 67
14 Lower Threshold Delay: solid-state output page 68
15 Upper Threshold Setting: solid-state output page 68
16 Lower Threshold Setting: solid-state output page 69
17 Digital Signalling Mode page 70
18 Digital Fault Signalling page 71
11 Output Signal Processing Test
Miscellaneous
page 72
12 Factory Settings page 72
19 Range Inversion page 73
1F Keylock Level page 73
1A
Non-operational Spare
1B
1D
1E