User's Manual

2-57
1010NFM-3J
Section 2
NOTE: In single channel 1010’s the datalogger uses a compression scheme that precludes
backward scrolling.
Important point about Datalogger resources and dual-channel systems.
When logging data on both measurement channels simultaneously, the Datalogger stores reports in
a single common file. It is important that you select Site ID to appear on each line of data so that you
can always identify which channel generated report.
2.10 THE I/O DATA CONTROL MENU
This menu becomes available after picking a Meter Type and Channel.
Use this menu to assign functions for the meter’s analog outputs and optional inputs. The Analog Out
Setup assigns functions to the meter’s current, voltage and pulse rate outputs. Each menu cell pre-
sents an option list of the available data items. In addition, you can set up the alarm relays, enable and
span the analog input ports.
Siemens Dual Path SITE1
Assign Data to Analog Outputs
I/O Data Control
Analog Out Setup
Relay Setup
Analog Input Setup
Use this menu to enable
and span optional
analog inputs.
Use this menu to
assign data functions
to analog outputs.
Use this menu t
o
assign alarm
functions to rela
y
outputs.