User's Manual

2-52
1010NFM-3JSection 2
2.8.4 STRIPCHART CLEAR
Use this menu cell to clear the stripchart. Selecting [Yes] erases all current stripchart data.
To erase the Stripchart plot:
To access the [Stripchart Clear] option list press
Move the cursor to [Yes] by pressing
To clear the current Stripchart plot press
2.9 THE DATALOGGER SETUP MENU
This menu becomes available after picking Meter Type and Measurement Channel.
The integral Datalogger records data for eventual display on Graphics Screen, or for connection to an
RS-232 compatible external device (printer, computer, network, etc.). Use Datalogger Setup to select
data items and real-time events for datalogger reports. You can also set the logging interval, operating
mode and screen format. The Datalogger Setup menu allows you to choose time interval-based data
categories or event-based status alarms, and to specify the interval between data reports.
View Datalogger reports on the display screen or transmit them via the RS-232 Serial Port to external
printers and computers. Note that a single-channel meter uses a compression algorithm to maximize
data storage. This disables back scrolling of datalogger reports.
ENT
Datalogger Mode Off
Datalogger Data None
Log Time Interval 1 Min.
Data Logger Events None
Display Datalogger Off
Siemens Dual Path Path 1
Select datalogger destination
Datalogger Setup
Use this menu cell
to select a logging
interval.
Use this menu cell to
pick a destination for
Datalogger reports.
Use this menu cell to
select real-time
Datalogger triggers.
Use this menu cell to
select items fo
r
Datalogger reports.
Use this menu cell to
send Datalogger
reports to selected
destination and pick
up a line wrap mode.