User's Manual

1-6

1010NFM-3JSection 1

Selecting Items from an Option List

Examine the screen below. It shows how to use an option list to select a liquid for your application. How

to access this menu will be explained later. Note that the menu name [Application Data] appears

highlighted on lower left of the screen. Note also that the menu cell [Liquid Class] is highlighted - the

right-hand column shows the answer [Water 20C/68F].

Pressing the <Right Arrow> changes the left-hand column to [Select Liquid]. Pressing the <Right Ar-

row> again accesses the option list. This expands the highlighted area to show the list contents. Note

that a cursor (arrow) points to the top item on the list.

The <Up and Down Arrows> scroll the option lists. Every press moves the cursor to the next item in

sequence. Due to the size of display screen, some option lists include more items than the display can

show. For example, on the screen above the last option shown is [Acetic Acid]. However, this option list

has more listings. Continue to press the <Down Arrow> to see more liquid selections. When you arrive

at the last item on a list, the next <Down Arrow> press brings you back to the top of the list; because

the option lists are of the “wrap-around” type.

To select an option list item, move the cursor to the item and then press the <ENT> key.This places

your selection at the top of the list and moves you out of the option list to the next menu cell. Examine

screen on next page. The option list item: [Diesel Fuel] has been selected. Note that this appears on

the right-hand column and that the highlighted area moves to the next menu cell in sequence: [Esti-

mated Vs m/s].

Liquid Class

Access Liquid Option List

Estimated Vs m/s Water 50C/122F

Viscosity cS Water 75C/167F

Density SG ens Water 100C/212F

Water 125C/257F

Water 150C/302F

Water 175C/347F

Water 200C/392F

Water 225C/437F

Water 250C/482F

Acetic Acid

Select Liquid >Water 20C/68F

Siemens 2 Channel [1] Channel 1

Select Liquid Class from Liquid Table

Temperature Range -40F to 250F

Pipe Configuration Fully Developed

Anomaly Diams 10

Liquid Class Water 20C/68F

Application Data