User's Manual

1-5
1010NFM-3JSection 1
1.7.1 ACCESSING AND LEAVING THE MENU
Upon first turning the meter on you see a Siemens graphic. This means that there is no active site
setup currently stored in memory. Note that this screen identifies the software version of the meter on
the upper right-hand corner of the display.
Make sure the keypad enable switch is in the correct position then press the <MENU> key to select the
menu. The first time you access the Installation Menu, you can leave it only by saving a site or by
turning the meter off. After installing and activating a site, use the <MENU> key to toggle between a
graphic display screen and the last accessed menu location.
Top menu screen for dual-channel system Top menu screen for single-channel system
When you press the <MENU> key, the cursor arrives at the first level of the installation menu. Refer to
the sample screens above. The left screen is from a dual-channel model. The right screen is from a
single channel model. Note that two columns, one on the left-hand side and the other on right-hand
side, divide the screen. The first left-hand item, [Meter Type], is highlighted (white type on black). [Meter
Type] allows you to choose a meter configuration from the highlighted right-hand column list. With
single channel models, the only option is [Single Channel]. The next left-hand selection is [Meter Facili-
ties]. Use the [Meter Facilities] menu to set global meter options and controls.
1.7.2 HOW TO ENTER DATA
The left-hand column shows the menu cells (described previously). Another way to think about left-
hand column items is to consider them menu questions. Then you can see that the right-hand column
answers these questions. Right-hand column answers can be:
z Another series of menu cells (may become left column items when selected).
z An item from a scrollable option list (e.g., a class of liquids).
z A numeric entry (e.g., a pipe outer diameter).
z An alphanumeric string (e.g., a site name).
Siemens 2 Channel [1] Channel 1
Select Meter Type
Meter Facilities Dual Beam Flow
Using the Menu Ch 1 + 2 Flow
Ch 1 - 2 Flow
Meter Type >Dual Channel Flow
Liquid Class
Siemens Site [1]
Select Meter Type
Meter Facilities
Meter Type Single Channel
ver. 3.01.00
Software
Version
(x.xx.xx)