User's Manual

1010NFM-3J
Index
Index-8
Selecting 2-19
Pipe Considerations For Clamp-on Transducer 5-2
Pipe Data Menu 2-6
Outer Diameter, Wall Thickness 2-6, 2-9
Pipe Data Menu Structure 2-7
Pipe Dimensions 5-2
Pipe Material 2-9
Selecting 2-9
Pipe Outer Diameter 4-3
Selecting 2-9, 4-3
Pipe Outer Dimension 2-9
Pipe Parameters 1-1, 2-6
Pipe Size 2-8
Selecting 2-9
Pipe Table 4-2
Factory Settings 4-2
Accessing Menu 4-2
Pipe Temperature Range 2-18
Selecting 2-18
Pipe Wall Thickness 4-3
POSFLOW 2-36, 2-42
Power Failure 2-1
Preparing The Pipe Surface 3-3
Pressure Drop, Flow Tubes 6-9
Print Site Setup 5-16
Programming, installation guide 2-85
R
Recall Site Command 2-2
Recall Site Setup 2-1
Recommended Mounting 7-2
Reference Hole 3-6, 3-8
Reflect Mode
Mounting Frames and Spacer Bar 3-4
With Spacer Bar Only 3-5
Reflect Mount
Installation With Mounting Track 3-12
Reflexor Mode 7-1
Adjacent Transducer Mounting 7-3
Diagnostic Data 7-8
In-Line Transducer Mounting 7-3
Selecting 7-4
Relay Option List 2-60
Relay Setup 2-60, 5-16
Assigning Relay Functions 2-61
Resultant Data 1-9
ReversaMatic 2-31
Reynolds Number 2-14
Compensation Factors 5-10
RS-232 Setup Menu 4-13
Baud Rate 4-13
Parity 4-14
RTD 4-10
Calibrate Menu 4-10