User's Manual

1010NFM-3J
Index
Index-5
H
HF Menu Item 2-69
Automatic Adjustment Procedure 2-71
Manual Adjustment Procedure 2-70
Hardware Installation Guide 3-1
Hazardous Applications 1-1
High Limit Cursor 7-6
High S.G. 2-46
High Viscosity cS 2-46
High Temperature 2-46
How To Recall A Site Setup 2-2
How To Use Spectra Screen Data and Controls 7-6
HyperTerminal (see Appendix B)
I
I/O Data Control 5-16
I/O Data Control Menu 2-57
Inaccurate Viscosity Values 5-5
Index Pin 3-13
Initial Makeup 2-28, 6-7
In-line Method 7-3
In-line Transit-time 1-9
[Install Completed?] Command 2-25
Installation Guide 2-85
Check List For 1010 System Start-Up & Performance 2-85
Programming 2-85
Transducer Mounting 2-85
Installation Menu 1-1, 1-4
Installing a 1012T Mounting Track In Direct Mode 3-13
180 Degrees Opposed With Mounting Track 3-13
Installing a 1012T Mounting Track In Reflect Mode 3-11
Installing The Transducers 3-1
Picking The Appropriate Transducer 5-2
Preparing The Pipe 3-3
Finding The Halfway Distance 3-10
K
Kc Calibration 2-48
Kc Control 1-11
Keypad 1-3
Enable/Disable Switch 1-2
L
Leak Detection 2-22
Line Feed 4-14
RS-232 4-13
Liner Material 2-10
Default Material 2-10
Material Option List 2-10
Liner Thickness 2-10
Liquid Composition 7-9
Liquid Conditions 5-5
Liquid Data 6-6