User manual

Operation

Siemens Building Technologies

Fire Safety & Security Products 01.2009

6. Highlight the box beside Min. Blocks and press the button.

Î You will be able to set the number of sensor blocks that must be activated.

Î Setting the Min. Blocks will only be available if Motion Search is selected.

Î Once you set your desired search conditions, highlight Search and press the

button to display the search results in the Motion Search screen.

Î Selecting Cancel exits the screen without saving the changes.

When you search for motion events of another camera, you will be asked whether

or not you want to delete the previous search results from the list.

9.6.6 Clip-Copy screen

The Clip-Copy screen can be used to copy video clips to an external USB hard

disk, CD-RW or flash drive. The copied video clips can be viewed on computers

running Microsoft Windows 98, ME, 2000, XP or Vista. Refer to the Appendix,

Section 12.1: Preparing the USB hard disk drive in Windows 2000 for information

on pre

paring the external drive for clip copy. The clip copy can be simply done by

pressing the Clip Copy button.

Pressing and holding the Clip Copy button for three seconds or longer during the

playback will set the starting point of the video to be clip copied, and the

icon

displays at the bottom-left corner of the screen. Pressing and holding the Clip Copy

button for three seconds or longer again will set the ending point of the video to be

clip copied by displaying the Clip-Copy screen.

Fig. 100 Clip-Copy screen

You can search video from the first to last recorded images, or you can set the

start and stop times and dates.

1. Highlight the box beside From and press the

button to toggle between On

and Off.

Î When set to Off, you can enter a specific Date and Time.

Î When set to On, the search will be from the first recorded image.

2. Highlight the box beside To and press the

button to toggle between On and

Off.

Î When set to Off, you can enter a specific Date and Time.

Î When set to On, the search will be from the last recorded image.

3. Highlight the box beside Channels and press the

button.

Î You can select the cameras that you would like to include in your video clip.