User manual

Operation
81
Siemens Building Technologies
Fire Safety & Security Products 01.2009
The Motion Search… can be selected from the Search menu while the DVR
displays the camera full screen. The Motion Search screen displays a list of
motion events. Use the arrow buttons to highlight the event for which you would
like to see and press the
button to display the video associated with selected
event on the small search screen.
Highlighting Close and pressing the
button extract the video associated with the
Motion event and display the first image of the event. Pressing the
button will
start playing the “event” video segment. Pressing the Play button returns to live
monitoring.
You can also narrow your event search by selecting the Option… button and
setting up the new search condition.
Fig. 99 Motion Search Option screen
You can search video from the first to last recorded images, or you can set the
start and stop times and dates.
1. Highlight the box beside From and press the
button to toggle between On
and Off.
Î When set to Off, you can enter a specific Date and Time.
Î When set to On, the search will be from the first recorded image.
2. Highlight the box beside To and press the
button to toggle between On and
Off.
Î When set to Off, you can enter a specific Date and Time.
Î When set to On, the search will be from the last recorded image.
3. Highlight the box beside Type and press the
button.
Î You can select between Motion Search and Museum Search. Motion Search
detects motion in the defined area. Museum Search detects if a defined object
has moved.
4. Highlight the box beside Zone and press the
button.
Î An image from the video appears with a grid overlaid.
Î You can turn sensor blocks On and Off to define the area of the picture in
which you want to search for motion.
NOTE
When setting the Museum Search Zone, the zone should be placed inside of the border line of the
target object. If the selected block is placed on the boarder line, the sensitivity of the Museum Search
may decrease.
Î The zone should be placed or focused on the centre or, at least, within the
outline of targeted object.
5. Highlight the box beside Sensitivity and press the
button.
Î You will be able to select from 1 (low sensitivity) to 5 (high sensitivity).