User manual

Operation
78
Siemens Building Technologies
Fire Safety & Security Products 01.2009
2. Highlight the box beside To and press the button to toggle between On and
Off.
Î When set to Off, you can enter a specific Date and Time.
Î When set to On, the search will be from the last recorded image.
3. Highlight the box beside Check Time Overlap and press the
button.
Î It toggles between On and Off.
You will only be able to turn the Check Time Overlap on or off if a user-
defined date and time is set to From and To. If the DVR’s date and time have
been reset, it is possible for the DVR to have more than one overlapping start
and stop time. When set to On, you will be asked to select one of the
overlapping start and stop time. When set to Off, the DVR will display search
results from all start times to all stop times.
4. Highlight the box beside Alarm-In and press the
button.
Î You can select the alarm inputs that you want to include in your search.
5. Highlight the box beside Motion and press the
button.
Î You can select the cameras for which you want any reports of motion
detection.
6. Highlight the box beside Video Loss and press the
button.
Î You can select the cameras for which you want any reports of lost video.
7. Highlight the box beside Text-In and press the
button.
Î You can select the text-in devices which you want any report of text input.
8. Highlight the box beside Record Channels and press the
button.
Î You can select the cameras that you want to search for any reports of event
recorded data. The DVR will display the events (not the camera channels) that
occurred and that also are recorded on the camera channel that you selected.
If you do not select a camera channel in this field, the DVR will search events
that are not associated with cameras.
Î You can also toggle On and Off self-diagnostic events as part of your search.
The choices are:
– Panic Record
– Check Recording
– Check Alarm-In
– Disk Almost Full
– Disk Bad
– Disk Temperature
– Disk S.M.A.R.T.
– Fan Error
Î Once you set your desired search conditions, highlight Search and press the
button to display the search results in the Event Log Search screen.
Î Selecting Cancel exits the screen without saving the changes.