User manual

Operation

Siemens Building Technologies

Fire Safety & Security Products 01.2009

Zoom In / Out

Focus Near / Far

Iris Open / Close

Set / Load Preset

9.3 Using a mouse

You can use a mouse instead of the front panel buttons to perform many of the

DVR functions. The following operations are supported when using a mouse during

live monitoring.

When in quad (2x2) display mode, clicking the mouse button on a camera image

switches that camera to full screen. Clicking the mouse button again returns to the

quad (2x2) screen format.

Clicking the right mouse button during live monitoring displays the following menu:

Fig. 86 Mouse menu

Selecting Sequence, Freeze and PTZ… is the same as pressing the Menu,

and

PTZ buttons as described above in Section 9.2: Live monitoring.

NOTE

Sequence will be selected from the menu only in full screen mode.

Selecting Zoom… zooms in on the live image. While in the zoom mode, there are

two ways to move around the enlarged portion of the video. First, there is a

rectangle showing what area of the image will be enlarged. Click inside the

rectangle to move to another area of the image you want enlarged. Second, click

and hold the mouse button on the enlarged video and drag the video.

Selecting Display shows the following menu:

Fig. 87 Mouse display menu

Clicking Camera and selecting the camera number is the same as pressing the

individual camera buttons on the front panel which displays the selected camera

full screen.

Selecting 2x2 displays the cameras in quad (2x2) screen mode.