User manual

Operation
71
Siemens Building Technologies
Fire Safety & Security Products 01.2009
Fig. 83 Preset view screen
Select the desired preset and press the
button to load the preset.
Pressing the Menu button displays the following PTZ menu. Set the feature you
wish to control by selecting it from the menu. Refer to the camera instructions for
the proper settings. Depending on the camera specifications, some features may
not be supported.
Refer to the Appendix, Section 12.6.2: Local control of CCDA and CCDS dome
came
ras for information on controlling CCDA and CCDS dome cameras.
Fig. 84 PTZ menu
You can use a mouse for convenient PTZ control. Position the mouse pointer at
the bottom of the screen, and the following PTZ toolbar will display.
Fig. 85 PTZ controls
Clicking
on the left side exits the toolbar. If you want to display the toolbar again,
position the mouse pointer at the bottom of the screen. Change the toolbar location
by clicking the empty space on the left side of the toolbar and drag it to where you
want it located on the screen. Use the arrow buttons on the toolbar to pan or tilt the
camera in the direction you want. The other controls on the toolbar perform as
described below: