User manual

Configuration
66
Siemens Building Technologies
Fire Safety & Security Products 01.2009
Record Setup The user can establish all Record settings on a local system or a PC
running RAS.
Search The user can access the Search mode on a local system or a PC running
RAS.
Clip-Copy The user can copy video clips on a local system or a PC running RAS, and
save video data in an AVI, bitmap or JPEG file format.
To add a User, highlight the + User… box and press the button. A virtual
keyboard appears allowing you to enter the User Name. Enter the name and
assign the User to a Group and password. You can use camera buttons 1 to 9 on
the front panel to assign the password. The password can be up to 8 digits. You
will be asked to confirm the password.
Fig. 78 New User setup screen
NOTE
In addition to using the front panel buttons, you can use the virtual keyboard to assign the password.
To display the virtual keyboard click the
button using the mouse (not supplied).
Highlighting the box beside Auto Login allows you to select a User to be
automatically logged in when the DVR is powered up. It can also be set to never
automatically login a user.
Highlighting the box beside Auto Logout allows you to select from a list of times
that the user will be automatically logged out. The options are: Never, 1 min., 3
min., 5 min., 10 min., 15 min., 20 min., 25 min., 30 min. and 1 hr.
Î You can save your changes by highlighting Save and pressing the button.
Î Selecting Cancel exits the screen without saving the changes.
8.11.4 Shutdown… screen
Highlight Shutdown in the System menu and press the button.
Î The Shutdown screen appears asking you to confirm whether or not you want
to shut the system down.
Fig. 79 Shutdown screen
After selecting Shutdown and pressing the
button, a screen will appear telling
you when it is safe to disconnect power.