User manual

Configuration
65
Siemens Building Technologies
Fire Safety & Security Products 01.2009
NOTE
Write down the new password and save it in a secure place. If the password is forgotten, the unit must
be reset using the Factory Reset button and all data settings will be lost.
Highlighting a User Name and pressing the button allows you to add or change
the password assigned to that user. You can also change the group to which the
user is assigned.
The
column can be used to delete a User Name or an entire Group. If the is
greyed out, that Group or User cannot be deleted. Highlight the
and press the
button. You will be asked to confirm that you want to delete the User or Group. To
delete the User currently logged into the DVR on a local system or a PC running
RAS, log the user out of the system first and then delete the user.
To add a Group, highlight the + Group… box and press the
button. A virtual
keyboard appears allowing you to enter the Group name. You can use up to 15
characters including spaces in the group name. Enter the name and assign
authority levels to the group.
Fig. 77 New Group setup screen
Highlighting the Authority box and pressing the
button will toggle between all
authority levels being turned On and Off. Highlighting the individual authority level
boxes and pressing the
button will toggle between that authority level being
turned On and Off. The authority levels that can be turned On and Off are:
Shutdown The user can shut the system down on a local system.
Upgrade The user can upgrade the software on a local system or a PC running
RAS.
System Time Change The user can change the system date and time on a local system or a PC
running RAS.
Data Clear The user can clear all video data or format disks on a local system or a PC
running RAS.
Setup The user without Setup authority cannot establish any system settings
excluding system shutdown and logout on a local system or a PC running
RAS.
Color Control The user can control brightness, contrast, hue and saturation for cameras
on a local system or a PC running RAS.
PTZ Control The user can control the PTZ camera on a local system or a PC running
RAS.
Alarm-Out Control The user can reset the DVR’s outputs including the internal buzzer during
an alarm by pressing the Alarm button on a local system or alarm-out
control button on a PC running RAS.
Covert Camera View The user can view video from cameras set as Covert while in the Live
Monitoring or Search mode on a local system or a PC running RAS.
System Check The user can view the remote system status or check the remote system
status as a batch process on a PC running RAS.