User manual
Configuration
62
Siemens Building Technologies
Fire Safety & Security Products 01.2009
After you are finished with the Information Screen, you can highlight Save and
press the
button to save the changes and exit the screen. If you do not wish to
save the changes, highlight Cancel and press the
button to exit the screen.
8.11.2 Date/Time setup
Highlight Date/Time in the System menu and press the button.
Î The Date/Time setup screen appears.
Fig. 73 Date/Time setup screen
Date/Time
1. Highlight the first box beside Date and press the
button.
Î The individual sections of the date will highlight.
Î Use the Up and Down arrow buttons to change the number. Use the Left and
Right arrow buttons to move between month, date and year.
2. Once you have the correct date, press the
button.
3. Highlight the Format box beside Date and press the
button.
Î Select from the three available date formats and press the button to save
your selected format.
4. Highlight the first box beside Time and press the
button.
Î The individual sections of the time will highlight.
Î Use the Up and Down arrow buttons to change the number. Use the Left and
Right arrow buttons to move between hour, minutes and seconds.
5. Once you have the correct time, press the
button.
6. Highlight the Format box beside Time and press the
button.
Î Select from the three available time formats and press the button to save
your selected format.
NOTE
The clock will not start running until you have highlighted Save and pressed the
button.
7. Highlight the box beside Time Zone and press the button.
Î Select your time zone from the list and press the button.
8. Highlight Use Daylight Saving Time and press the
button.
Î Pressing the button toggles between On and Off.
9. Highlight the Holiday tab, and the Holiday setup screen appears