User manual

Configuration
60
Siemens Building Technologies
Fire Safety & Security Products 01.2009
6. Highlight the desired language and press the button.
Î The box beside Version displays the software version of the DVR.
Upgrading the software
To upgrade the software, connect a USB device containing the upgrade package
file to the DVR.
1. Highlight Upgrade… and press the
button.
Î The Upgrade screen appears.
The screen displays the upgrade package file names that are available. The
“.rui” indicates that the file is for software upgrades.
2. Select the desired file and press the
button.
Highlighting the Install button and pressing the
button will install the
selected software package. Highlighting the Cancel button and pressing the
button will close the window without upgrading the software.
Î If the upgrade package file is not installed on the DVR properly, you will get
an error message.
Î The system restarts automatically after completing the upgrade, and it takes
approximately one minute to restart.
Fig. 69 Upgrade screen
NOTE
The USB device must be FAT16 or FAT32 format.
You can import saved DVR settings or export the current DVR settings.
Importing settings
To import saved DVR settings, connect the USB device containing the setup file
(.dat) to the DVR.
1. Highlight Setup – Import… and press the
button.
2. Select the desired setup file and press the Import button to import the
selected settings and change the DVR settings accordingly.
3. Highlight Include Network Setup and press the
button to toggle between
On and Off.
Î When set to Off, the network settings will not be changed.
Fig. 70 Setup Import screen