User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 01.2009

8.9 Configuring devices

You can configure the video, alarm and remote control devices connected to the

DVR.

Fig. 58 Devices menu

8.9.1 Camera setup screen

Highlight Camera in the Devices menu and press the button.

Î The Camera setup screen appears.

Fig. 59 Camera setup screen

You can turn the camera number On or Off, and you can change the Title of each

camera using the virtual keyboard. You can also determine which cameras will

display on the monitors by selecting Normal, Covert 1 or Covert 2 from a drop-

down list in the Use column.

NOTE

When selecting the Covert 1, the DVR displays the camera title and status icons on the covert video.

When selecting the Covert 2, the DVR displays only camera title on the covert video.

NOTE

A user who does not have Covert Camera View authority, the user cannot view video from cameras

set to Covert 1 or Covert 2 in both the live monitoring and playback modes.

1. Highlight the PTZ tab, and the PTZ setup screen displays.