User manual

Configuration
51
Siemens Building Technologies
Fire Safety & Security Products 01.2009
8.7.6 Event status
Highlight Event Status in the Event menu and press the button to display the
Event Status screen.
Fig. 53 Event Status screen
The Event Status screen displays the status of the DVR’s systems and inputs.
Events will be highlighted, and related channels or events will flicker for five
seconds when detected.
Alarm-In, Motion, Video Loss and Text-In will be highlighted when each event is
detected based on the settings you made in the Alarm-In, Motion Detection and
Text-In setup screen on the Event menu.
Panic Record will be highlighted while the DVR is in the panic recording mode.
Check Alarm-In and Check Recording will be highlighted when each event is
detected based on the settings you made in the System Event setup screen on
the Event menu.
Fan Error will be highlighted when the cooling fan to the left of the power cord on
the rear panel is not working for more than four seconds.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and
the level of disk usage reaches the Disk Almost Full percentage you made in the
System Event setup screen on the Event menu.
Disk Full will be highlighted when the DVR is not in the Recycle mode and all
available storage space has been used.