User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 01.2009

Fig. 52 System Event Actions screen

Actions

The DVR can be set to react to system events. System events can activate the

Alarm-Out connector, sound the DVR’s internal buzzer, and/or notify a number of

different devices.

1. Highlight the Alarm-Out box beside the desired event (Check Recording,

Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or

Disk S.M.A.R.T.), and press the

button.

2. Select between Alarm Output connector and the DVR’s internal buzzer that

you would like to activate and to sound whenever the DVR detects event.

NOTE

The Alarm-Out action cannot be set to System and Panic Record events.

3. Highlight the Notify box beside the desired event (System, Panic Record,

Check Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk

Temperature, or Disk S.M.A.R.T.), and press the

button.

Î You can toggle the entire list On and Off by highlighting Notification and

pressing the

button. You can toggle the individual items On and Off by

highlighting that item and pressing the

button.

4. Highlight OK and press the

button to accept your changes.

NOTE

Mail notify is the only option available for the System event.

NOTE

For the Notify action to work, the DVR should be registered in the RAS (Remote Administration

System).

Î You can save your System Event changes by highlighting Save and pressing

the

button.

Î Selecting Cancel exits the screen without saving the changes.