User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 01.2009

Fig. 50 Check Recording screen

Highlighting the box under the Interval heading beside each alarm-in and

pressing the

button allows you to change the interval that you want the

DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30

days or “Never".

3. Highlight the Storage tab and the Storage screen displays.

Fig. 51 Storage screen

Storage

1. Highlight the box beside Disk Bad Notify, and press the

button.

Î Select percentage level of bad disk sectors at which you want the DVR to

trigger an alert. Percentage levels range from 10% to 90%.

2. Highlight the box beside Disk Almost Full Notify, and press the

button.

Î Select the percentage level of disk usage at which you want the DVR to

trigger an alert. Percentage levels range from 80% to 99%.

3. Highlight the first box beside Disk S.M.A.R.T., and press the

button.

4. Use the Up and Down arrow buttons to scroll through the numbers. Refer to

the hard disk drive manufacturer’s documentation for the correct temperature

setting.

Î If the temperature of hard disk drive exceeds the defined threshold, the

system triggers an alert.

5. Highlight the second box beside Disk S.M.A.R.T., and press the

button.

6. Select either ºC (Celsius) or ºF (Fahrenheit), and press the

button.

7. Highlight the Actions tab and the System Event Actions screen displays.