User manual

Configuration
39
Siemens Building Technologies
Fire Safety & Security Products 01.2009
6. Highlight OK and press the button to accept your changes.
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
7. Highlight the desired box under the PTZ heading, and press the
button.
Î A list of PTZ presets appear.
8. Select the preset position for each PTZ camera, where you want PTZ
cameras to move to whenever the DVR detects an input on the associated
alarm input.
Î You can save your Alarm-In changes by highlighting Save and pressing .
Î Selecting Cancel exits the screen without saving the changes.
8.7.2 Motion Detection screen
Highlight Motion Detection in the Event menu and press the button.
Î The Motion Detection setup screen appears.
Fig. 37 Motion Detection Settings screen
Settings
Your DVR has built-in video motion detection. Video motion detection can be
turned On or Off for each camera.
Highlighting the box under the Sensitivity heading and pressing the
button
allows you to adjust the DVR’s sensitivity to motion for Daytime and Nighttime
independently. There are five settings with 1 being the least sensitive and 5 being
the most sensitive.
Fig. 38 Motion Detection Sensitivity screen