User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 01.2009

Fig. 35 Alarm-In Actions screen

You can set the actions the DVR will take whenever it senses an input on one of its

alarm input connectors.

1. Highlight the desired box under the Record heading, and press the

button.

Î A list of cameras appears.

2. Select the cameras that you want the DVR to record whenever it detects an

input on the associated alarm input.

NOTE

For the Record action, the camera you select should be set to the Event or Time & Event recording

mode in the Record Schedule setup screen.

3. Highlight the desired box under the Alarm-Out heading, and press the

button.

4. Select between Alarm Output and Beep (DVR’s internal buzzer) that you

would like to activate whenever the DVR detects an input on the associated

alarm input.

NOTE

For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in

the Alarm-Out setup screen (Schedule tab).

5. Highlight the desired box under the Notify heading, and press the button.

Î The Alarm-In Notify menu appears.

Fig. 36 Alarm-In Notify menu

You can toggle the entire list On and Off by highlighting Notification and

pressing the

button. You can toggle the individual items On and Off by

highlighting that item and pressing the

button.