User manual
Configuration
33
Siemens Building Technologies
Fire Safety & Security Products 01.2009
Fig. 26 Authentication setup screen
10. Highlight the box beside Sender and enter the sender’s e-mail address.
11. Use the virtual keyboard to enter the e-mail address.
NOTE
The e-mail address must include the “@” character to be a valid address.
12. Highlight the box beside Recipient and enter the recipient’s e-mail address.
13. Use the virtual keyboard to enter the e-mail address.
14. Highlight the Callback tab.
Î The Callback screen displays.
Î The DVR can be set up to contact a computer running RAS (Remote
Administration System) when an event occurs.
Fig. 27 Callback setup screen
Callback
1. Highlight LAN and press the
button to toggle between On and Off.
Î When LAN is turned On you can change the IP addresses.
2. Highlight the IP Address box that you want to change and press the
button.
3. Enter the IP address of the computer you want contacted during an event.
Î You can enter up to five IP addresses.
4. Highlight the box beside Retry and enter the number of times you would like
the DVR to try contacting the computer running RAS.
Î You can select from 1 to 10 retries.
5. You can save your notification changes by highlighting Save and pressing the
button.
Î Selecting Cancel exits the screen without saving the changes.
6. Highlight the Web Client tab.
Î The Web Client screen displays.