User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 01.2009

NOTE

The local recording speed might be affected by various network bandwidth (Transfer Speed)

conditions.

7. Highlight the Mail tab, and the Mail screen displays.

Î The DVR can be set up to send an email when an event occurs.

Fig. 25 Mail setup screen

Mail

1. Highlight Enable and press the

button to toggle between On and Off.

Î You will only be able to change the settings if Mail is enabled.

2. Highlight the box beside SMTP Server and press the

button.

Î A virtual keyboard appears that you can use to enter the IP address or

domain name of the SMTP server.

NOTE

You will need to get the IP Address or domain name of the SMTP Server from your network

administrator.

NOTE

You can use the domain name instead of IP address if you already set up the DNS Server when

setting up the LAN.

3. Use the arrow buttons to enter the SMTP Server IP address obtained from

your system administrator.

4. Highlight the box beside Port and press the

button.

5. Use the arrow buttons to enter the SMTP Server port number obtained from

your system administrator. The default port number is 25.

6. Highlight Use SSL/TLS and press the

button to toggle between On and Off.

Î When it is On, the DVR can send an email via an SMTP server requiring SSL

(Secure Sockets Layer) authentication.

7. Highlight the box beside Authentication and press the

button.

Î An Authentication screen appears.

8. Highlight Use and press the

button to toggle between On and Off.

9. Highlight the box beside User/Password and press the

button.

Î A virtual keyboard appears allowing you to enter the user ID and password.