User manual

Configuration
28
Siemens Building Technologies
Fire Safety & Security Products 01.2009
8.5.2 Schedule screen
Highlight Schedule in the Record menu and press the button.
Î The Schedule setup screen appears.
Fig. 20 Schedule setup screen
You can program the DVR to record only during certain times based on time, day
of the week, and holidays. The smallest time segment you can use is 15 minutes.
Highlighting Schedule On and pressing the
button toggles between On and Off.
In the Schedule On mode, the DVR records video based on the schedule
established in the Schedule screen. When turning Schedule recording Off, you will
be asked to confirm your decision, and
displays at the top-left corner of each
camera screen. Panic recording will function even when Schedule is turned off.
displays during panic recording.
1. Highlight the "+" and press the
button to add a schedule item.
2. Highlight the box under the Day heading and press the
button to change
the days that the scheduled recording will take place.
Î Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
3. Highlight the box under the Range heading and press the
button to change
the time range that the scheduled recording will take place.
Î The smallest time segment you can use is 15 minutes.
4. Highlight the box under the Mode heading and press the
button to change
the recording mode that will be used.
Î Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset
day and time range as long as the
Panic
button is not pressed. Use the No
Record mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the
icon displays at the top-left corner
of the screen. The DVR will record and displays the
icon at the top-left
corner of the screen during the scheduled times.
When the DVR is in the Event mode, the red
icon displays at the top-left
corner of the screen. The DVR will record and displays the
icon at the top-
left corner of the screen when any event occurs. When the DVR is in the Pre-
Event recoding mode, the yellow
icon displays when there is no event, and
the DVR is not recording. When the DVR is in the Pre-Event mode, the red
and
display when any event occurs and the DVR starts recording.