User manual

Installation

Siemens Building Technologies

Fire Safety & Security Products 01.2009

7 Installation

CAUTION Refer installation and servicing to qualified personnel.

The diagram below shows a typical DVR installation.

Fig. 1 Typical DVR installation

No special tools are required to install the DVR. Refer to the installation manuals

for the other items that make up part of your system.

Fig. 2 DVR rear panel

Video input

Video loop-through

Video out

RS232 port

Alarm input/output

RS485 port

Factory reset switch

Network port

Power cord connector

Your DVR can be used with either PAL or NTSC equipment.

NOTE

You cannot mix PAL and NTSC equipment. For example you cannot use a PAL camera and an NTSC

monitor.