User manual

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

8.6 Network setup

In the main screen, use the Left or Right arrow buttons to display the Network

menu.

Fig. 33 Network menu

8.6.1 Network screen

Highlight Network in the Network menu and press the button.

Î The Network setup screen displays.

Î You will be able to change the Network, Mail, Callback and Web Client

settings.

Fig. 34 Network setup screen

Network

1. Highlight the first box beside Transfer Speed.

2. Press the Up and Down arrow buttons to set the Transfer Speed from

50 Kbps to 100 Mbps.

3. Highlight the second box beside Transfer Speed.

Î You can select the unit of measure for the transfer speed between: bps and

ips.

4. Press the

button to set the transfer speed.

5. Highlight the box beside Quality and press the

button.

Î You can select the quality from: Very High, High, Standard and Low.

6. Press the

button to set the Quality.

NOTE

The higher Quality settings require higher Transfer Speed settings. The transfer speed you set is the

maximum speed. Depending on the network environment, this speed may not be achieved.