User manual

Configuration
33
Siemens Building Technologies
Fire Safety & Security Products 12.2008
1. Highlight the "+" and press the button to add a schedule item.
2. Highlight the box under the Day heading and press the
button to change
the days that the scheduled recording will take place.
Î Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
3. Highlight the box under the Range heading and press the
button to
change the time range that the scheduled recording will take place.
Î The smallest time segment you can use is 15 minutes.
4. Highlight the box under the Mode heading and press the
button to change
the recording mode that will be used. (Simple Mode Only).
Î Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset
day and time range as long as the
Panic
button is not pressed. Use the No
Record mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the
icon displays at the top-left corner
of the screen. The DVR will record and displays the
icon at the top-left
corner of the screen during the scheduled times.
When the DVR is in the Event mode, the red
icon displays at the top-left
corner of the screen. The DVR will record and displays the
icon at the top-
left corner of the screen when any event occurs. When the DVR is in the Pre-
Event recoding mode, the yellow
icon displays when there is no event, and
the DVR is not recording. When the DVR is in the Pre-Event mode, the red
and
display when any event occurs and the DVR starts recording.
When the DVR is in the Time & Event mode, the DVR will follow the Time
settings and the
icon displays at the top-left corner of the screen. The DVR
follows the Event settings and the
icon displays.
5. Highlight the box under the Channels heading and press the
button to
select which cameras will be recorded. (Simple Mode Only)
6. Highlight the box under the Settings heading and press the
button to
define the recording settings.
Î You can set the ips and quality (ips, Quality and Dwell for Advanced Mode
setup) of the recording for any modes you set up in the Mode column. If you
do not set the ips, quality and Dwell in the Settings column, the DVR will
follow the default settings. See below for details.
Fig. 29 Schedule – Settings (Advanced Mode) setup screen