User manual
Operation
103
Siemens Building Technologies
Fire Safety & Security Products 12.2008
4. Highlight the box beside Channels and press the button.
Î You can select the cameras that you would like to include in your video clip.
5. Highlight the box beside Dest. and press the
button.
Î You can select the storage device on which you would like to record the video
clip. You can choose from Internal DVD-RW, USB Storage and USB CD-RW.
IMPORTANT The USB device for clip copy must be FAT 16 or FAT32 format.
NOTE
While copying video clips on the CD-RW or DVD RW, the recording speed might decrease.
NOTE
While copying video clips on the CD-RW or DVD RW, the DVR will stop archiving video data until clip
copy is finished.
NOTE
When the error message “Firmware update of the optical drive is required” displays, update the
firmware of the installed DVD RW drive. Please follow the instructions described in the chapter
Configuration, System Information.
The DVR automatically assigns a file name to the video clip. However, you
can give the video clip file a different name.
6. Highlight the box beside File Name and press the
button.
Î A virtual keyboard appears.
7. Enter a file name for the video you are backing up and select Close.
Î The DVR will automatically add the camera number (for example “01”) and
“.exe” to the file name.
NOTE
When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.
8. Highlight Include Text-In Data and press the button.
Î
This will toggle between On and Off. When this
feature is On, you can include
text-in data when copying video if the video was recorded with text-in data.
9. Highlight Verify After Burning and press the
button.
Î This will toggle between On and Off. When this feature is On, you can verify
that the data is written on the CD-RW or DVD RW properly.
10. Once you have given the video clip a file name, highlight the Start button and
press the
button.
Î The confirmation screen displaying data size will appear. When the storage
device does not have enough space, the DVR will ask if you want to copy as
much of the video clip as possible in the available space.
11. Highlight the Continue button and press the
button to continue clip copy.
Î Once the clip copy starts, you can cancel it by selecting Cancel or hide the
screen by selecting Close.
Î When selecting Close, Clip Copy continues and a confirmation screen will
display when complete.