Electropneumatic Positioner Part Manual

Operation
91
SIP ART PS2 Manual
A5E00074631--06
1
23 4
1 Display
2 Operation mode key
3 Decrement key
4 Increment key
Figure 4-2 Display and input keys of the positioner
Explanations of the input keys.
S The operation mode key (manual key) serves to switch over the op-
erating mode and pass on parameters.
.
NOTE
By pressing and holding the operation mode key and additionally
pressing the decrement key, you can select the parameters in reverse
order .
S The decrement key serves to select parameter values in config-
uration and to move the actuator in manual operation.
S The increment key serves to select parameter values in config-
uration and to move the actuator in manual operation.
The current firmware state is displayed when you exit the configuration
menu.
Figure 4-3 Firmware version, example: 4.00.00
Firmware version