Router User Manual

7 Interfacing to the Machine 09.91

7.3.2 Definition of R parameters as cycle machine data, cycle setting data

7.3.2 Definition of R parameters as cycle machine data, cycle setting

data

To protect parameters (R110 to R199) used for the measuring cycles against inadvertent

modification, the parameters can be defined as:

• Cycle machine data (CMD) or

• Cycle setting data (CSD)

The definition is made via general NC machine data 14 to 17.

Definition of area limits with general NC MC 14 to 17.

R parameter

110 to 199 per channel

Where overlaps occur, SDs are dominant.

Any allocation possible.

MD 14 = Cycle MD from

R parameter

number.....

MD 16 = Cycle SD from

R parameter

number.....

MD 17 = Cycle SD to

R parameter

number.....

MD 15 = Cycle MD to

R parameter

number.....

Cycle MD

Cycle SD

SINUMERIK 810T, GA3 (BN)