Saw User Manual

Section D: Program description

Description of important program elements

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 99/107

Manual_SIMOTION Flying Saw_V1.4.doc

• FB_BGD_FS_SPB_out()

• FB_BGD_FS_SPB_read()

FB_BGD_FS_SPB_reset()

The SyncPos buffer is deleted (cleared) using this FB.

FB_BGD_FS_SPB_in()

Using this FB, when the print mark is sensed, a new synchronous position

is entered into the buffer.

FB_BGD_FS_SPB_out()

Using this FB, after every cut, a synchronous position is deleted (cleared)

from the buffer (FIFO)

FB_BGD_FS_SPB_read()

This FB is used to check as to whether a new synchronous position is

available for the next cut and the flying saw must be synchronized.