Saw User Manual

Section B: The application example as demonstration

system

li ti

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 59/107

Manual_SIMOTION Flying Saw_V1.4.doc

5.2.6 Technology view

The technology view of the application can be selected from every operator

screen using the

TECHNOLOGY button.

Fig. 5-10 Technology view of the flying saw

Using the trace function on the HMI screen, the actual position and velocity

of the flying saw, the starting position, its velocities and position of the

material web referred to the particular cut can be monitored and traced in

the technology view.

It can also be easily seen how the position of the flying saw precisely

corresponds to that of the material web during the cut itself.

Using the trace-

record function

Actual position of the

flying saw

Velocity of the flying

saw

Velocity of the

material web

Quiescent position of

the flying saw